How To Wrap A Sprained Foot With Kt Tape

Make sure that the ankle is flexed so that the foot and the leg form a 90º angle. You can wrap your sprained ankle to avoid swelling and bruising.

KT tape for sprained ankle see if it helps with all the

Wrap the bandage around the ball of your foot once, keeping it somewhat taut with a light pull.

How to wrap a sprained foot with kt tape. It is better to do it under the guidance of an exper. Starting just under the ball of the foot overlap each piece of tape by half the width of the tape until the entire arch of the foot is covered down to the end of the thick strip. Tear a piece of tape in half lengthwise and place this piece around the big toe to help secure the tensioning strip.

Begin peeling the backing away from the rest. This taping technique is good for ankle sprains and very flexible ankles. Do not excessively pull the foot upwards;

It gently lifts the skin and decreases the skin irritation by providing mild support to the ankle. Repeat once or twice, from slightly different positions, until the tape feels firm and the entire ankle bone is covered, and it starts to prevent the foot from being able to point. The tape mostly helps joint support and blood circulation as well as decreasing swelling.

Wrap the bandage around the ball of your foot once, keeping it somewhat taut with a light pull. Kinesio taping is part of therapeutic management that needs training and qualification, one should know the specific structure and it’s attachment, alignment and action to put the tape properly. Guide the tape down the side of the ankle, under the heel, and back up to the anchor.

A sprained foot takes time to heal, and this is aided by wrapping. On the other hand, kt tape can be forgiving and stretchy, or tight with only a slight give. Think of these ligaments as pieces of tape on the outside of your ankle that attach the small outside ankle bone (fibula) to the main leg bone (tibia) and foot.

Kinesiology tape, mostly known as kt wrap, is an elastic adhesive tape designed to reinforce the stability of sprained ankle, tendons, and muscles of your body. Cut a piece of tape that will wrap around the ankle. Finish by securing the bandage a few inches above the ankle with medical tape.

To wrap with tape, tear off a long piece of kt to stretch from one side of your ankle under your foot and up the different aspects of the ankle. Remove the backing from the end of the tape and apply it with zero stretch along the inside of the foot in the area of the arch. How to use kt tape kinesiology taping.

Rub the tape for several seconds once done applying the tape to activate the glue. The top of the foot consists of many bones, nerves, ligaments, and tendons that can all be affected and painful. Use kt tape for ankle stability ankle instability or weakness can lead to chronic sprains and tearing of ligaments and tendons and lead to other injuries.

Additionally, kinesiology tape is flexible to allow for a healthy range of motion to speed the healing process. Pull the bandage diagonally from the underside of the toes throughout the foot’s high and circle it across the ankle. This demand on the foot necessitates many different “pieces” to accomplish its role in movement.

Start with one side keeping the ankle at 90 degrees, and wrap the tape around the initial side of your choosing covering the malleolus and. 8 steps for wrapping with kt tape tear off a piece of kt that’s long enough to stretch from one side of your ankle, under your foot, and up the other side of your ankle. Wrap the bandage across the ball of your foot as soon as, maintaining it considerably taut with a mild pull.

Additionally, kt tape is very comfortable and allows for slight healthy range of motion in order to speed the healing process. If you have had problem getting kinesiology tape to stick in the past, you may need to prep with an extra skin adhesive. Regular cloth tape doesn’t stretch, so using it just amounts to a tape cast around the joint.

Extending the tape as far it'll go and releasing a quarter of its length will have the desired results. Sit with your foot at a. Start with wrapping a piece of athletic tape around your wrist.tear off a piece of kt that’s long enough to stretch from one side of your ankle, under your foot, and up the other side of your ankle.tear off the tape and attach the end to the top band from step 3.

Clean the foot and check for cuts. When you get to the ankle, wrap the bandage around the heel, over the instep, and under the foot. Start by cleaning the foot thoroughly.

Applying kinesiology tape over the achilles tendon. How to treat a sprained ankle sprained ankle treating a. Then apply the horizontal strip.

After this, slowly begin circling your method across the arch of the foot. Walk to make sure the big toe is stabilized. Wrap the bandage around the ball of your foot once, keeping it somewhat taut with a light pull.

The foot should be bent.

Read More

How To Replace Deck Boards With Composite

Start by removing all of the old deck boards(or with your newly built foundation). Make sure to check requirements of the composite deck boards as well as consult local.

Arbordeck Trex Transcend Composite Decking How To

You should use a pry bar to remove the nails and screws that hold the deck boards in place.

How to replace deck boards with composite. Remove the old wood or composite deck boards. If you happen to own a traditional wood deck that’s showing its age or, worse still, becoming a hazard and unfit for prupose, you may want to consider a comprehensive deck replacement. You will need to inspect each of the deck boards in order to see of they are damaged and in need of repair or replacement.

These fasteners ensure the deck has uniform gaps between boards. Because composite is weather resistant, maintenance free and not prone to splintering, you’ll likely replace decking boards and handrailing at the very least. The cost of composite decking.

Suppose you are looking to replace your wood decking with composite material. Jessica drills deck screws into the composite decking’s fasteners. While a hardwood deck can be constructed with joists 16′ apart, most composite deck joists must be built 12′ or less apart to prevent sagging.

This significantly cuts the cost of replacement. How to replace deck boards. The tool you will use here is a pincer or anything that you can use to remove the nails that you install the wood deck.

Check joist spacing and add any joists that may be needed. If the composite deck boards are damaged in anyway or appear to be in need of replacement. Mark the deck boards to be replaced use a.

Repairing board damage with filler. Replacing deck boards with composite decking. Then we cover the old wood joists with tape flashing.

This protects composite deck boards from water damage, rot, and pests for an enduring deck space! We’ve cut an additional stringer for the stairs so the composite decking is well supported. But, it doesn ’t have to end there.

Atm, the main deck is done with 2 12′ boards plus a 17′ board for each strip. You need to attach the new deck boards to the old joists, so the fewer holes and chunks taken out of them the better. You could also consider replacing elements like fascia and stairs , either just the top surface of each step or a more complete overhaul, in which.

Replacing deck boards with composite decking can be a great way to upgrade your outside space. As long as you had your deck built by a licensed professional, your current. New composite deck boards can often be installed on an existing deck substructure (the posts, joists, and beams that hold up your wooden deck).

Once all the old deck boards were out of the way, i had the green light for the composites. Resurfacing your deck with trex ® is easy to do, and the results are easy to love. Drill pilot holes for the screws.

In that case, we are assuming that the substructure that supports the deck is already in place and is in good condition. Composite decking brands such as trex or fiberon composite deck boards, are crafted from recycled plastic particles and organic wood fibers then capped with a strong capstock. Composite boards won’t warp or bend over time like wood due to their protection from moisture, making them durable and attractive for years to come.

In comparison to pt wood, composite decking does have advantages. The substructure consists of the beams, posts, and joists that support the actual surface decking boards. To answer this question, you need to take a look at your deck’s substructure.

Replacing deck boards with composite may cost between $8.00 and $22.00 per square foot, assuming you install the new composite yourself. Skip composite and stick with real wood. Removing the wood deck boards is the first thing to do when you want to replace them with composite decks.

Can you replace your wooden boards? We would like to put composite boards in place of the old boards, but we only want to do the top layer…not all of the wood framings. The cost of replacing deck boards with composite also increases if you want to replace more than the surface of your deck.

Our answer <p>this is a great project to take on whenever the existing deck boards have become cracked, rotted, or otherwise deteriorated. Try not to damage the joists that the boards are attached to. You must make sure you remove all the wood decks so that the joists will be visible.

With the existing decking and railing off of the deck, recheck the structure and replace or stabilize any part of the structure or stairs that need to be fixed. I am trying to figure out how many boards i would need to replace my existing boards. The first new composite board was installed flush with the outside edge of the deck.

Read More

How To Take A Screenshot On Mac With Windows Keyboard

By default, screenshots save to your desktop with the name “screen shot [date] at [time].png.” Click its icon to launch it.

How to take screenshot o n chromebook Chromebook

Press the “option + f14” keys to take a screenshot of an active window when using the apple pro keyboard and press the “fn + shift + option + f11” to capture the screenshot from apple wireless keyboard or macbook keyboard.

How to take a screenshot on mac with windows keyboard. If you are using windows keyboard on mac, press windows + control + shift + 3 keys. Using the snip & sketch app press the start button and type quote & draft in the search field. This allows you to paste the screenshot into microsoft word, excel and other apps.

Hit the prtscn button/ or print scrn button, to take a screenshot of the entire screen: How to take a screenshot on windows 10 with a mac keyboard? Using a toolbar that appears at the top of the screen, you can perform a rectangular snip, a freeform snip, a window snip, or a.

To run snip & sketch without a keyboard, open the start menu and locate “snip & sketch” in the alphabetical applications list. 2) click on the “save” button. 1) first of all, select a place to save the screenshot.

How to take a screenshot on mac using keyboard shortcuts. The specific key combination you will use depends on the apple. You can take pictures (called screenshots) or recordings of the screen on your mac using screenshot or keyboard shortcuts.screenshot provides a panel of tools that let you easily take screenshots and screen recordings, with options to control what you capture — for example, you can set a timer delay or include the pointer or clicks.

Taking a screenshot of your desktop is a function of windows or mac and not autoquotes. Press command + control + shift + 3 keys on the keyboard of your mac. Snipping tool is one more way to take.

How to take a screenshot on your mac (mojave, catalina and big sur) apple has added the new tool in new macos to help simplify this process. Taking a screenshot with a mac. But that’s not true at all.

If the screenshot is successfully taken and saved, windows 10 will send you a notification to tell you that the screenshot was captured. How to take a mac screenshot with a keyboard shortcut apple’s macos operating system includes several shortcuts for taking screenshots of the entire screen or certain parts of the screen. Take screenshots or screen recordings on mac.

When you take a screenshot on mac, the screenshot is also saved to the clipboard. How to take screenshot on windows. All of our favorite mac desktops and laptops.

To take an active window. The mac keyboard commands are the quickest and easiest way to take a screenshot on your mac for macos 11, whether you want to capture the entire screen or a potion, or a window. With snip & sketch open, click the “new” button.

Screenshots in windows 1st method press the print screen button on your keyboard and this will take a snapshot of your screen (whatever is displayed). Press shift + option + f11 to capture. #5 how to take screenshots on mac desktop with windows keyboard.

Alternatively you can run osk.exe to bring up the on screen keyboard and use the virtual print screen key. Also, storing screenshots in different. If you are using a mac desktop with a windows keyboard, you may think that the functions have changed.

Press option + f14 to take s screenshot of an active window when using the apple pro keyboard. When using windows, pressing the print screen button (located in the top of the keyboard) will take a screenshot of your whole screen. Taking screenshots in windows vista 7, 8,10 etc.

Where do screenshots get saved on mac? Here are some of the common methods used to take screenshots and annotate with the snip and sketch functionality in windows 10: Read the steps below to know how you can take screenshots on mac with a.

There are a couple of different options to choose from if you want to take a screenshot or a recording with your mac computer. I would suggest using the snipping tool if you are using windows vista or 7. Press the new button to start quoting with the snip bar.

How to take a screenshot on windows 10 and save it as a jpg. Once you take the screenshot, it will get saved as a png file on your macos. One way is through keyboard shortcuts.

We get this question asked quite often and decided to include this information in our knowledge base. If you’re still running the old windows 7 operating system on your acer laptop, you should press the print screen button on the keyboard to take a screenshot and then paste the image to an opening app (word, notepad, etc.) by pressing ctrl + v. I have a macbook with windows 7 home premium on the bootcamp side.

Read More

How To Make Alcohol At Home With Yeast

What abv alcohol does bread yeast make? For instance, this strawberry wine recipe relies on wild yeast that the fruit produces naturally.

How to Make Easy Homemade Apple Wine Apple wine, Apple

Baking yeast generally scores very low on the alcohol tolerance scale, which means that fermentation may stop when there are still many unfermented sugars left that a better yeast strain would have converted into alcohol.

How to make alcohol at home with yeast. Yeast cells do not like living in a corrosive environment, there will always be a point at which the yeast cell can no longer function. Making alcohol at home from sugar and baking yeast is a relatively easy process. Open the yeast packet about halfway.

18 pounds of granulated table sugar. Wipe the needle or paper clip with the alcohol swab (this sterilizes the needle and removes contaminants that could prevent the yeast from culturing properly). 100 grams (a little over ½ a cup) chopped or whole raisins;

Make sure the cap is screwed on tight, then shake it up until everything is thoroughly. Yeast strains used for the production of alcohol have developed ways of dealing with these stresses. Let’s take a look at 5 easiest liquors to make at home with fruit, yeast, and sugar.

You can create your own alcohol from fruit, fruit juice, grains, and other organic materials that have high sugar content. To make alcohol from fruit juice at home, get yourself some simple ingredients as following: Homemade alcohol and bubbles of carbon dioxide.

Alcohol inhibits yeast, which is why different yeast strains for different applications have different alcohol tolerances. It's available at home brewing stores and online. Bread yeast tends to ferment alcohol up to about 8% without too much effort which is a fine tolerance range for beer, but when trying to produce alcohol beyond this level, the bread yeast begins to struggle, very often stopping around 9% or 10%.

A 7.5 gallon food grade bucket with lid (alternatively use can use a plastic or glass carboy) With the appearance of foam on the surface, fizz and a slight sour smell, the sourdough is ready for use. A clean metal pot to prepare the sugar solution.

How to make vodka at home? If you don’t know how to do this, just add the yeast to a few tablespoons of warm water and a teaspoon of sugar, and stir it until everything dissolves. Traditionally all alcohol was made from wild yeasts.

As with all yeast, there are limitations on the tolerance it will have to alcohol. Some wine recipes don't require wine yeast. Alcohol is produced when sugar and yeast combine to make alcohol and carbon dioxide.

Cover the neck of the jar with gauze. How to make alcohol at home fast without yeast. A packet of yeast powder.

To make about 5.5 gallons of homemade alcohol, you will need: A clean metal pot to prepare the sugar solution. Over time, specific strains of yeast were cultivated to make beer, wine, etc.

Draw a small amount of the yeast paste into the needle or swirl the paper clip around in the yeast packet to coat it. The key ingredient, sugar, is converted into alcohol by the process of fermentation by the second ingredient, yeast. However, this doesn’t always result in a tasty brew.

A bottle of 100% pure fruit juice. Homemade liquor can be made easily if … see details » Baking yeast generally scores very low on the alcohol tolerance scale, which means that fermentation may stop when there are still many unfermented sugars left that a better yeast strain would have converted into alcohol.bread yeast tends to ferment alcohol up to about 8% without too much effort which is a fine tolerance range for beer, but.

Once you’ve produced the alcohol, you can use it to make liquors or mixed drinks. How to make alcohol at home homemade alcohol only needs two important ingredients. One packet of super yeast or distillers yeast.

Actually the easiest way to make alcohol is get any baking yeast from walmart mix 3 tbs with 2 liters of sugar water( 1.8 liters of warm water, 3 cups unbleached sugar) add the yeast and shake bottle. Figure out how much yeast you want to use. Instead, wine yeast leaves no taste in wine and can withstand up to a 16 percent concentration of alcohol.

As mentioned earlier, if you are a beer brewer there are ways to make a recipe without adding yeast yourself. Add 2 tablespoons of sugar (no more). Pour out half a cup of juice into a glass or bottle, add all the amount of yeast and sugar we have, tighten the lip and shake it well to make sure the yeast and sugar are dissolved.

Let it sit for about 10 minutes until it starts to froth up, then add it to the rest of the jug mixture. You can buy yeasts online or at your local brewing and wine making shops. 1 ¼ cups spring water or filtered water (not tap water, because the chlorine will kill the living bacteria you need to make the starter, janette says.) 1 tablespoon sugar;

You need a fermentation vessel, sugar, and yeast for the fermentation process, and the ability to purify the alcohol you’ve made. Transfer the future starter to a dark place (cover) at room temperature. Online you can find a recipe for “toast ale” which is a modern way for brewing beer using leftover bread because of its yeast content and unique properties it can add to your beer recipe.

A few spices like mustard seed or caraway make a. Luckily, it is straightforward and inexpensive to make alcohol from table sugar (sucrose). Figure out if you want to make a high or low alcohol content beverage, and add yeast.

Adding yeast to a solution of sugar dissolved in water begins the process of fermentation where the yeast digests the sugars and releases two byproducts:

Read More

How Would You Anonymously Get Revenge On Someone With Only Their Phone Number

However, if the phone number belongs to an iphone, you’re luckier. Send an sms but this time, fake the callerid.

Pin On Karma Mottos

Here, you'll find a way that will most likely keep you anonymous.

How would you anonymously get revenge on someone with only their phone number. You're probably only reading this anonymous revenge pranks article to find a way to get even without being detected. With our anonymous email revenge tactic, you get to specify the senders name and email address. 100+ ways to seek revenge.

You obviously have their phone number. You can even choose when you want the message to be sent! But as a person who has had friends fully doxxed before due to a simple phone number being exposed is a sick thing to do.

Get revenge within the next 60 seconds with this tactic. If you have your enemy's phone number, you have everything you need to give them a rude awakening. Even if you're stuck in a jam because of what someone has done to you, hold your head up high and don't let them see how it has hurt you.

Make sure it is not your personal number but it is a number you can throw away easily. A while back i posted a craigslist ad for free justin bieber tickets and put my cousins number. Put up barriers and get on with things as you always do.

If you want to mess with this person do it other ways. Use his real name and forward the responses you get from your gmail address. Make your revenge sms message look like it came from someone else completely!

Send your victim an email from someone else! Send twisted text that will haunt their day. Just listen the story.(2008) me & my friend were pursuing engineering from bangalore & it was a bit difficult to get sim for non local in especially south india.

Send an sms but this time, fake the callerid. Do something public that shames and humiliates them. Just make sure you when you sign up for them or request info, try not to get anything mailed or someone will inadvertently have a bunch of.

Report the bitch's vehicle stolen so they get pulled over the next time a cop sees them driving around (have the license plate and vehicle description ready). What happens if someone replies to the anonymous email i've sent? Put his phone number and it will take a while to get pulled down as spam.

Consquently, any reply that is made by your victim to the email, will be sent to the person you stated as the sender. This site is a bit more harmless in the way you can prank your target. This site allows you to send multiple “facts” about various animals like cats, dogs, and random everyday objects.

Get a phone and text that sick person. The answer will be slightly different from you expect. If you have access to their phone or account (like icloud, google, cell service), change the password, then jack up the phone bill with added services.

Once you do that, you gain access to all of their phone records and online activities. Steps on how to change paypal password without phone number: That way, that person cannot trace your number back.

Get his work email address and use that for all your replies from the gay dudes from cl. Make up any info you don't have, but obviously the number would be legit so tick off any boxes for preferred method of contact: It will also be unlikely to harm another person or his property.

Of course, your victim will feel harassed and you'll get a good laugh and satisfaction from it. (it’s an old trick but it’s better not to follow). Car has 200,000 miles but runs well and smogs.

If you want to hack someone’s phone number, you have to gain access to their phone and install a spy app into it. Let the world know about their wrongdoing: There also used to be a text bomb app where you could send someone the same message like a hundred times just back to back to back.

Make your revenge sms message look like it came from someone else completely! Use a small needle and make marks in his car spelling fucker or what ever in a few weeks and with some rain the word fucker will come out on his car in brown. The best revenge is living well. act as if whatever happened that provoked your revenge affected you in no way.

You can take out a billboard or make a sign or something that is widely visible. Send your victim an email from someone else! Once you prank someone, your actions cannot be undone—prepare for repercussions, be they good or bad.

You can even choose when you want the message to be sent! It is helpful to know if person you are going to prank can take a joke or not. I'm sure you can get a few photos of it from your work.

Plus, there’s always someone ready with a quotable line or more content every day on social media. The last prank on our top 4 list is sendrandomfacts.com. Before we get started on our countdown for 100+ ways to seek revenge, think long and hard about the reason why you want to get revenge.

Put any tube with gas to his cars back pipe with a wire when it get hot it will say bang and scare the shit out of him or he die from a car crash. While you're there, put up his car for sale. Post his home phone number and make sure they only call during dinner time.

Find a treasured item that you know is important to them and destroy it in front of them. Get revenge within the next 60 seconds with this tactic. On free section create a used old car that needs to be picked up today because your grandmother died and you are moving out of town.

Hacking a phone with just the number is difficult but it’s possible.

Read More

How To Steam Clean A Couch With An Iron

Hold the suede over the area long enough to heat it, then move the wand to a new area. The fabric is made of nylon, polyester and rayon.

3 Cheap And Fast Methods To Clean The Bottom Of Your Steam

The better way to make upholstery look tidy and cared is to steam clean it regularly.

How to steam clean a couch with an iron. As the old saying goes, when life gives you a broken iron, make a steam cleaner. You may want to consider mixing the baking soda in dry carpet cleaner for an even deeper clean. The sofa is one of the hardest pieces of furniture to clean in the house.

Make sure to get close to the couch fabric, allowing the steam to penetrate it. It is as simple as using a vacuum or iron. This code implies that water and solvent will damage the upholstery fabric.

Clean the entire sofa, especially behind the cushions. Steam all hard and upholstered surfaces, like mattresses, box springs, furniture, and baseboards. Will still require an iron to completely.

Hence, you can only use a vacuum or brush to clean it. If your couch has this code, you can safely use the steam treatment. Learn how to your carpet back into shape t.

How to steam clean a couch iron. Work the steam wand back and forth over your sofa, holding it about 6 inches from the surface. Then, remove any pillows and cushions on your couch and use the steam cleaner to clean those first.

Surprising things you can clean with a clothes steamer. How to clean a sofa with a steamer. If you do not have a steamer at hand, you can use an iron with a steam setting.

To use the steam cleaner, simply press the button to spray the steam onto the upholstery and then vacuum up the moisture with the. See more ideas about clean couch, steam clean couch, steam cleaning. Yes, it's totally safe to steam clean your suede sofa.

When you glide the nozzle across each surface, move slowly, so each section gets enough steam to kill the bed bugs and their eggs. Steam heat removes bacteria and dirt from your sofa without using water, which can mar the look of suede by spotting. You may wonder how to clean the couch with a steam cleaner.

Grab your iron, then place it on the “steam” setting, and wave it back and forth over some trouble spots in your couch. The best way to clean a steam iron is with mixture of vinegar and baking soda, which should be applied nice, cloth. Microfiber attracts pet hair and skin oils.

Can you steam a couch with an iron? Pro tip you can use your iron to deep clean a couch. Plug in the steam cleaner and allow it to heat up.

Contrarily, if the furniture is a code x, you cannot perform steaming. How to clean a fabric sofa with steam cleaner you. Simply lay them down on a flat surface, adjust the thermostat on the iron to the correct fabric setting and turn the steam button on top to on.

Then vacuum with the upholstery attachment tool. Sure, your couch may not get as dirty and grimy as other furniture in your home, but you will still need to steam clean it. How to clean upholstery with a steam cleaner 11 steps.

If you try to spray it or rub it down with a rag you could damage the fabric or cause moisture to settle into the cushions. How to clean a fabric sofa with steam cleaner watch | download. By admin june 28, 2018.

One of the best ways to clean your sofa is with a steamer tool, like the one you use to iron out your clothes. Anyway, [claudio] from [accidental science] had a clothes iron with a broken head that he de… To clean the upholstery, use a garment steamer or steam iron to kill dust mites.

Wait a few hours, then repeat the process 2 to 3 times to make sure you get all of the bed bugs. To clean upholstery with a steam cleaner, start by filling the steam cleaner with warm water and upholstery cleaner. If you don't have time to run couch covers or pillow cases through the washing machine, you can always turn to the great refresher, your steam iron.

However, the variety of steam clean machines in the market may puzzle even the most experienced buyers. 10 step guide on to steam clean a couch cleaner pro.

Read More

How Long Does It Take To Fill A Pool With Two Hoses

So in 1 minute they will fill 1/20 th of the swimming pool. Per the question, we have:

How Does A Pool Sand Filter Work Hunker Pool Sand Pool Pumps And Filters Pool Filter Sand

If the pipe of larger diameter is used for four hours and the pipe of smaller diameter for 9 hours, only half of the pool can be filled.

How long does it take to fill a pool with two hoses. Assuming you have enough hose already, i'd just go ahead and use the two. Both the hoses fill in 20 minutes they do 1/20 of the job in 1 minute 2 hours for both to fill a pool, then ①:

How long would it take for each pipe to fill the pool separately? It can take 1 2 hours to fill a swimming pool using two pipes. H2 takes x hours, so it fills 1/x pool per hour.

Hose a could fill it in 2 hours, hose b could fill it in 3 hours and hose c can fill it in 6 hours. 2nd hose can fill a pool in 4 hours. Assuming your water pressure is pumping at 8 gallons per minute (480 gallons per hour) through your outside water hose, it would take 31.25 hours to fill a 15,000 gallon swimming pool.

But the larger hose alone takes 25 minutes to fill the swimming pool. Suppose one day both the hoses are turned on, but by accident the drain was left open. A chlorine free water treatment for pools.

So in 1 minute it will fill 1/25 th of the swimming pool. So 24k @ 8gpm = 50 hours. Equation=1/4 because it can finish 1/4 of the work in 1 hour.

The time it take to fill the pool all depends on the flow rate of the water and the size of the pool. Another hose needs 3 more hours to fill the pool than the two hoses combined. Generally, there are two hoses in a pool to fill it.

The average garden house delivers around nine gallons per minute. A large hose will fill a pool in 40 minutes while it takes a smaller hose 60 minutes to fill the same pool. The same pool takes 80 minutes to drain if the drain is open.

How long would it take to fill the pool that day? For others that are filling a much larger pool it could take multiple days until your pool water has reached capacity. It'll more than likely help, worst case it will not make any difference.

Don’t stop filling mid way, o. The standard size pool has a large volume and takes a lot of time to fill. How long would it take the second hose to fill the pool?

Please fill in all fields! If it takes 30 minutes for the larger hose to fill the swimming pool by itself, how long will it take the smaller hose to fill the pool on its own? A man is filling a pool from 3 hoses.

Either way will take a long time, i like the suggestions regarding using a hydrant. Substitute the values for r a, r b to get the answer. A hose can fill a swimming pool in 6 hours.

Basic calculation is easy, but i still want to cheat. A hose can fill a swimming pool in 6 hours. Then the flow rate of the hoses are r a = v 4, r a + r b = v 3.

1/6 + 1/4 = 1/t they can finish 1/t of the time when they work together. Let v be the volume of the pool. 6 hours for both to fill 3 pools.

However, there is a blockage in hose a, so the guy starts by using hoses b and c. Hence the rate of b alone is r b = ( r a + r b) − r a. Another hose needs 3 more hours to fill the pool than the two hoses combined.

3 hours for a to fill a poll, then ②: Time taken by horse a to fill the pool = 6 hrs time taken by horse b to fill the pool = y hrs time taken by both together to fill the pool = x hrs When the blockage in hose a has been cleared, hoses b and c are turned off and hose a starts being used.

Filling a 24k pool with the hose (while probably the best) might get a little tedious. A typical shared work equation each will do a fraction of the job, the. The time taken to fill a pool depends on various factors most important of them are the size of the pool and the speed at which the pool is getting filled with water.

Working together, it takes two different sized hoses 20 minutes to fill a small swimming pool. It will likely take 2 days to fill it up, but will be very gentle in terms of setting/stretching the liner. (v/60) + (v/30) = 3v/60 = v/20.

The time would be 2x3/2+3=6/5 minutes proof: If v be the volume of the swimming pool tank , then ; It takes both hoses working together 25 minutes to fill the pool.

6a=3 6b=2 6a+6b=3+2 =5 6/5 a + 6/5 b=1 a and b, working together, can fill. Think about filling it on the last day of one billing period and the first day off the next billing period, so the water won’t exceed your limits (at all, or by as much as if it were all in one month). On city water pressure, you would likely get around 8gpm out of the hose, 5 if your on a well.

Hence the time taken to fill the pool with hose b is v r b = v ( r a + r b) − r a. Inquiring minds like to know, so testing is fine, but two hoses are certainly not going to slow down the process. 100 minutes let whole part of swimming pool = 1, two different sized hoses take 20 minutes to fill the whole pool.

6 hours for a to fill 2 pools. How long will it take the larger hose to fill the pool by itself?: Equation= 1/6 because it can finish 1/6 of the work in 1 hour.

Let t = time for the larger hose to fill the pool then 4t = time for smaller hose to do the job and let the completed job = 1 (a full pool): 1st hose can fill a pool in 6 hours. Therefore it will take just 20 minutes to fill the pool tank if both hoses start operating together at the same time.

Together, they do 1/6 + 1/x per hour.

Read More

How To Remove Tape In Extensions With Rubbing Alcohol

Inexpensive and available in any drug store. How does rubbing alcohol remove tape in extensions?

How to remove fashion tape stickiness from your bra using

Removing tape in extensions with rubbing alcohol.

How to remove tape in extensions with rubbing alcohol. Do this row by row. Conditioner can be used in the same manner as oil to help remove the tape in hair extensions. Oil can be used to dissolve any adhesive, glue, or chemical bonds.

I've seen some people use rubbing alcohol to remove the tapes. This tape hair extension remover is part alcohol and part oil. Some people prefer alcohol removers for the fact that they are easy to spray and gently rub into their hair tape.

To properly remove tape in extensions you will not. How to remove tape in extensions with nail polish remover. Use conditioner, baby oil, or any other essential oil to tape.

Saturate the whole bond with rubbing alcohol, wait a minute or two and then separate the bonds.step by step process clip the acrylic nails as short as possible.the 100% pure acetone is a good solvent that could dissolve the glue on. Leave the oil on the tape for 10 to 15 minutes. Alternatively, soak a paper towel in cooking oil and lay it over the residue.

You may even be able to fashion rubbing alcohol at home too to easily remove tape in hair extensions (if you fancy doing some home brewing like you’re in breaking bad!). Rub the oil onto the extension tape. This process takes more time and patience then oil.

It's meant to be less. You're losing money by doing it in two appointments, it's time consuming but a lot of clients are very self conscious about their hair without them and wouldn't be happy having two appointments. Just pour the alcohol on the place needed and comb through your hair slowly.

First, lay the extensions on a flat surface with the sticky side up. After a few minutes, remove the paper towel and rub off the residue. To properly remove tape in extensions you will not need to pull them,.

Works fast and leaves no residue on tape hair extensions and dries fast. Apply weft release to the used tabs and rub it into the adhesive. Spray or rub the alcohol remover directly above the tape hair extension where the tape sticks into your strands.

These removers are sprayed directly above the tape in hair extension tab. Saturate the whole bond with rubbing alcohol, wait a minute or two and then separate the bonds. Leave the weft release to sit and start working on breaking the tape down for a few minutes.

With tapes they should only be taped to the amount of hair you would take when you're weaving with foils because the removal is so so much easier will a small amount of hair i open up the tape without alcohol first and then spray to get rid of the. Let the alcohol sit on the glued hair for three to five minutes so. If i ever re tape hair then i do it in two sessions usually putting them back in a couple of days later.

To remove duct tape residue, dampen a cloth with rubbing alcohol and rub the cloth over the residue until it comes off. Use additional spray as the corners are lifted to aid in. Once it’s been sitting for a while, gently pull any sticky pieces off of the tape tabs.

You may have to leave it on for a while before trying to remove it. Wait for the tape to dry. I tell the client to come with washed hair, remove the extensions, remove residue with alcohol, retape and tape back in.

The glue should slide right out:) enjoy. In many cases, massaging the tab area can help loosen the stickiness and allow the conditioner to seep in between the tape tabs. I have heard of the alcohol way but i'm too scared to do it lol so i just use moroccan oil.

Using your oil solution spray the tapes. Likewise, can you remove tape in extensions at home with rubbing alcohol?moisten a portion of a cleaning rag with rubbing alcohol and rub it onto the tape residue.once your hair is saturated and coated with the oil it won’t absorb the alcohols in the gel bond release.repeat the process until most of the adhesive is gone. Allow time for the alcohol based remover to seep down in between the tape tabs and gently peel apart.

Simply massage the oil into the area the adhesive is located. You can begin to remove the hair extensions.

Read More

How To Check Your Iron With A Coin

Below some basic steps you should follow: Through our network, essential services like market making, marketing, and technical support for coin listings are made available.

Old Cast Iron Toy Cat Bank *So excited to see this little

There are, however, a number of ways to check for anemia at home.

How to check your iron with a coin. The severity of your symptoms may depend on how quickly your anaemia develops, so anaemiascreen our home screening test for iron deficiency anaemia will help you check for the condition. Your eyelid appears to look pale whilst moving towards the light. Monitor your energy levels to see if you have become more sluggish.

Bitcoin (btc) is up 0.22% in the last 24 hours. Pull it down to watch it. All types of cryptocurrency are supported, from erc20 to custom blockchains.

The theory is that low iron can change your body's ph and if it is acidic, it reacts with. Direct chat rooms will be established so you can work together with our team to iron out all the details. It would be our pleasure and an honor to produce your custom challenge coin order.

According to the story, rubbing a gold ring on the outside of your cheek will help you detect if you are anemic. Using gold jewelry, such as a gold ring to test for iron deficiency is an old wives' tale 2. Testing iron levels through a finger prick.

The video features arvind sonar (71) from nashik and shows his son is seen placing spoons. For this test, you need to check your lower eyelid. A dark line indicates that you are anemic;

In the past making your own coin was an ordeal and a half, having to carve out a die and strike malleable metal under several tonnes of pressure. These days, it's as simple as making a 3d model and sending it to a cnc mill for machining. Tips on identifying metal detecting finds ….

Fatigue can be a sign of too much or too little iron in your blood stream 2. Compare your left cheek to your right cheek in the mirror. Start with looking at yourself into the mirror.

Place your right hand on a flat surface with palm up. Since coins are one of the most common finds, it is necessary to know some basics on how to identify old coins. There is a common belief that if gold jewelry leaves a dark mark on your skin, it means you have low iron.

An ice cube placed on silver will melt quicker than on iron and a little quicker than on copper. A good way to get familiar with the detector’s tones is to dig up small patches of land in your backyard and bury different materials such as aluminum, gold, nickel, iron, and steel. See your doctor if you suspect your iron levels are low.

Balance the gold ring on top of your wrist for ten minutes. Put an ice cube on each coin and then check to see how quickly each ice cube melts. Realize if you notice a thin, black line on your right cheek that you may be anemic.

A clinic or blood donation location will prick your finger to draw a few drops of blood, which are then used to measure the hemoglobin level. Method 1of 3:going to the doctor. The token tracker page also shows the analytics and historical data.

Originally published at decentralized tv. Your doctor is the best way to get your iron levels checked. Ferritin is a protein and the primary form of iron stored inside your body's cells.

The only way to check your iron level is to have a blood test conducted by a medical facility. Lift up the ring and see if a black circle has appeared on your skin. Please give us a toll free call.

And a 100% price match guarantee. The bitcoin price today is $ 32,907 usd with a 24 hour trading volume of $817.31m usd. Then use your device over each of these buried metals to practice and get used to the different pitches of the tone.

Btc coincheck icon price live data. If the coin has no face value, it might just be a medallion instead of a coin. This test is faster and less expensive than the tests a doctor may do by drawing blood from a vein.

No line indicates that you are not iron deficient. Follow along on the journey of making your own custom coin (and a box to go with it). Iron coin is a marketplace for selling used games — check it out!

Eyelids of any human being of any race are easy to check as it gives you an almost accurate result. The easiest way to conduct this test is to place a real silver coin and a potentially fake silver coin side by side. Iron coin (iron) token tracker on bscscan shows the price of the token $0.00, total supply 1,000,000,000,000,000, number of holders 169 and updated information of the token.

Read More

How To Fix Diastasis Recti Years Later With Exercise

As long as you do not have any medical issues, a surgery to repair your diastasis can be done at this point. Here is a safe diastasis recti exercise routine that you can use three days a week.

Binding your belly after birth Diastasis, Diastasis

Take time to appreciate all the wonders of what your body has done, rather than trying to fix it instantly after birth.

How to fix diastasis recti years later with exercise. This is not an overnight process. 5 tips on how to fix diastasis recti. I have mamas doing my mutu system program whose children are now in their 20s and 30s and have long flown the nest!

The fastest way to heal your diastasis recti will involve: Diastasis recti is a separation of the abdominal muscles. Sometimes, diastasis will resolve on its own within just a few weeks to months.

Diastasis recti is the separation of the rectus abdominis (abdominal, 6 pack) muscles from the midline tissue known as the linea alba (tissue lining the center of your core). Recti are called the straight muscles at the front abdomen. Some separation is normal, but it is considered diastasis recti when the gap is significant.

Can you fix diastasis recti years later? Common and consistent symptoms include back pain, core weakness, urinary stress incontinence, pelvic pr I, too, have diastasis recti 11 years after giving birth.

Recti is the plural of latin rectus which means straight. A diastasis recti naturally occurs during pregnancy. Core training aimed at strengthening the deep transverse abdominis;core work and pelvic floor work for at least 6 weeks.diastasis recti correction in general, correcting a dr includes proper fitting for an abdominal brace if needed.

Even if you had your baby years ago, check yourself! Symptoms can include back pain and feeling abdominal weakness. Ab separation often heals on its own, but targeted exercises may help close the gap more quickly.

I think it has worsened over the years and i am really curious if it can be treated now… The simplest thing you can do to help solve your diastasis recti is to stand tall and try not to slouch. If you have abdominal separation, you need to treat it right away.

It's never too late to heal diastasis recti and restore core strength and function with exercise. Diastasis recti is common, and an estimated 1 in 2 women experience the condition postpartum. They discovered years after giving birth, searching for answers, and almost giving up completely that they don’t need to put up with unwanted symptoms anymore.

Alternate between workout a and workout b with at least one day off between the two workouts. You can fix diastasis recti even years later. Your body has spent the last 9 months creating a miracle, growing a baby, and then giving birth to that baby.

Core training aimed at strengthening the deep transverse abdominis. I’ll be honest, until recently i didn’t know much about it, let alone doing anything about it. Healing your diastasis will take time.

After 12 weeks of doing keller’s exercise — 10 minutes a day — all the women had fixed their diastasis recti, sharma and. As an injury, a diastasis recti affects the entire function of the core. By standing tall and straight in a way that engages your core muscles, you will be helping to fix your separation.

I will get into that a little later as i break down the exercises for diastasis recti. Pregnancy is the leading cause of dr, but anyone can get it from improper exercise. Avoiding any exercise (s) that worsens your diastasis recti.

Many women suffer from lingering core issues for years, and even decades, after their pregnancies. So, can you heal diastasis recti years later? The diastasis recti exercise program.

I currently have a client who has had diastasis recti for 23 years and we’re closing that gap every week! How to fix diastasis recti years later exercise. Diastasis comes from the greek diastasis which means separation.

But in 40% of women, diastasis recti lingers which lead to various functional and aesthetic problems as time goes by. Can diastasis recti be corrected after 20 years. Separation is easier to fix within the first few months after giving birth but even years later it can be fixed.

The mosrt common ab exercise to avoid with diastasis recti! Diastasis recti is common after pregnancy but it can be. 135 days ago i decided to start an experiment, and keep a ‘diary’ or journal if you will of everything i’ve done to help fix it that includes exercises, progress photos, and even my personal thoughts and mental state through the process.

It is never too late to learn to move functionally and heal your. However, to my surprise, i found that before i could get back into a gym, i would first need to fix the separation that occurs in your abdominal muscles during pregnancy: Diastasis recti exercise programs can often help you relieve lower back pain and prevent leaking.

Do you have diastasis recti? You might have some loose skin after a diastasis repair that also could be dealt with at the same time by a plastic surgeon. If you’d like to watch the entire video, simply go back to the beginning.

Embody reclaim is proven to repair diastasis recti while restoring core strength, decreasing back pain and improving continence. What your exercise routine was like before and during your pregnancy. Diastasis recti surgery update 2 years later with images.

Read More

How To Charge A Puff Bar With Android Charger

How to charge a puff bar plus with iphone charger. Check the bottom of the disposable and you’ll notice a tiny gap at the base.

Pin on

4 smart identification usb output ports (1 usb c pd + 1 qc 3.0 + 2 usb a) can automatically detect and adjust the charging current to obtain fastest charging, also enable.

How to charge a puff bar with android charger. How to recharge a puff bar with iphone charger. When using the usb charger, never leave your vape pen unattended. Instead of being the negative data, the green wire in this cable is for the positive data.

Since the device has a 12 ah battery, if you charge it with a 1 amp charger, it will take 12 hours to charge. New versions of android seem to be coming out a lot faster than new hardware. Replacement cartridges cost only $2.39 each.

Mah (milliampere hour) measures how much energy a battery will hold and how long it will run before it needs recharged. This way of charging is great if you on on the go, or in the car. Puff bar lychee ice disposable pod.

It's a puff xxl by kado and its apple ice %5 nic and the colours are pink and yellow. Connect your phone to a charger and see if it is charging. (1) in many browsers you can right click and select print (2) cut the entire post and paste it into your favorite editor and print (3) use the specific browser print function.

10w fast wireless charger for iphone 11 pro xs max xr x 8 plus usb qi charging pad for samsung s10 s9 s8 edge note 10 with retail box mq50 2.38 / piece item sold ( 1455 ) 4a of shared output power for up to 4x extra battery. 00:14 gonna be showing you guys how to charge. Always monitor the device while charging using the usb.

The orange wire is exactly like the red wire.it has the five volts of direct current that’s the passage for positive charge. Most smartphone chargers come with a usb port, but if you have a usb cable, you can use it. This works, i checked with my current metering usb cable, but it does not show that it works in the battery status icon.

You’ll see the battery and tank neatly tucked into the case. The laptop is plugged in to the charging cable. Puff bar raises its own bar with its newly disposable pod device to puff away that is compact, light, and portable.

4.7 out of 5 stars 2,212. Hey, i bought a puff bar off a friend but it tastes like it's burnt most of the time when i hit, can someone help me figure out if it's real or not coz i saw some videos on fake puff bars. I searched up apple ice online and it looked like they were green.

Make sure the charger is on a flat surface so your juul device doesn’t fall off of it while it’s charging. Use your flathead to gently ease the cover out of the device. Use a usb wall charger, laptop, or portable battery to plug the juul charger into.

Lastly, the blue wire is for the negative data. But the best method of charging your battery is an external battery charger, seen below: Plug the usb charger into a port.

Each iget shion vape contains 6% nicotine. Get it as soon as wed, sep 22. There are other caveats as well.

Just enough to expose the sensor and wires. Unlike the white wire from before, the white wire in this cable is the ground wire. Remember how the wires are fitted since you’ll need to.

How to charge a laptop using a batterythe charging cable also has to come into the laptop. The charging cable has to be inserted into the phone. Tug it out slowly but not all the way.

So you could use a combination of this and adb shell. Portable cell phone chargers keep your phone charged while you're traveling, at work or on the go. It may be a bit expensive, though.3.

There are tons of reasons to use an external battery charger. This one can be tricky, since it can also charge a phone. If you write that to an executable file /data/setcharging.sh then you could call the script like /data/setcharging.sh 0 to disable or /data/setcharging.sh 1 to enable.

Puff bar plus has a bit more vaping power packed into it than our original device. The iphone’s charging cable will then be connected to the charger. When choosing a portable cell phone charger the most important specification to consider is the amount of mah.

All puff bar disposable devices require no maintenance, charging, or refilling. Yes, not only is it fine to update your phone while charging, it’s preferred most if not all mobile devices, including all smartphones, have their os installed on a firmware chip, the process of updating the firmware is called “flashing” if power. I over the years i have bought 3 new chargers for my 2011 macbook air.seems like the problem was that the end of the charger and the charging port on the computer simply needed to be cleaned with a stiff plastic brush…now all the chargers work.no problems with intermittent connections and this also should help with heat issues at the connection point as the mac book battery takes alot of.

The charger that comes with your juul device has a usb plug so it can be used in multiple locations. But if you’ve got a usb charger that you don t mind paying extra for, it will work.

Read More

How To Tint Headlights With Spray Paint

But, for the headlights i am looking for a spray wax / sealant. Let me add a bit of clarification, i am looking for a wax type product, one that you would also use for the car paint.

2021 0.3x10m1x33ft Neo Chameleon Purple Tint Vinyl Wrap

Spray a light, even layer all over both tail lights, making sure both lights achieve the same color.

How to tint headlights with spray paint. Standard paint removers should do the trick Once the first layer of tint is dry, you can apply a second layer of tint. I would suggest that if you decide that you want to tint your headlights that you use a tint film rather then a tint paint.

The yellow can go over darker shades like amber, as long as you apply the spray properly; Darkening the headlights on your vehicle can make a car look more aggressive and customized. Using tint spray generally intended for use on tail lights, you can slightly darken the outside surfaces of the lights to blend them into the body of the car.

Spray both sides of the tint with application fluid. It's easy to use, offering a convenient choice for your projects. This is done to the outside of the tail lights.

When the lights are turned on they shine through the tint, lighting up the road as normal. This will help with the positioning of the film. Menards, lowes, home depot etc should have it in the paint section.

2008 se plus black sold 1997 jeep zj limited 4.0 white 1985 dodge w150 5.9 grey sold 2007 jeep wk1 srt8 black 2008 300 srt8 black View gumtree free online classified ads for spray tint for headlights and more in south africa. A versatile tail light tint spray that also covers bumper lights and fog lights;

You can do this by gently removing the tint from the liner. Find spray tint for headlights in south africa! The more layers, the darker it becomes.

Leave this first layer of tint to dry for 20 to 30 minutes. When you are done, let the lights stand for 20 to 30 minutes until they are dry to the touch. He was able to strip the taillights without any short term damage (it is unknown if the plastic is weakened).

This will allow you to reposition the film on the light as well as preventing the tint. The previous owner had sanded down the headlight prior to painting and when the solvent was used to remove the spray the underlying light was completely frosted over and opaque. The color is a bit harder to take off if you make a mistake.

But, in the right hands, spray or paint on tint can change the look of your lights in a way that lay on applications often cannot. When lights are engaged the natural color shows through. We have a great online selection at the lowest prices with fast & free shipping on many items!

Get the best deals for headlights tint spray at ebay.com. You need to spray an ample amount of rapid tac on the headlights. You should measure the headlight’s body and cut the film on it.

I am somewhat familiar with the offerings for a quick spray wax type product, also familiar with some good paste waxes. As always, mist your fingers, and spray the rapid tac on the tint as well. A friend of mine who owns a body shop told me the best way to do this is to add your tint color to clear coat spray.

Before attaching the film sheet to the headlights, be mindful of washing the headlights properly. The tint/smoke film sheet should be aligned with the headlights’ exact shape to fit the headlight lenses. To get the best results, make sure to carefully read and follow the instructions provided by the headlight tint manufacturer.

Custom lens tint for cars or trucks. If you'd like to remove the lens tint, simply pick up a lens tint remover and the colour will easily disappear without causing any damage to your lights. You can either add enough to get the darkness you like, or make the tint light in the clear coat and add layers to darken it as desired.

Simply choose your favourite lens tint, and apply to your headlights or rear lights, either by spraying or painting the tint on. You now have two choices you can apply a tinted paint and then clear or you can apply a colored film. In order to remove the tint from the liner, carefully and slowly lift a corner and begin to peel the liner.

If you go with spray tint you need to know, right off the bat, that you are taking on a task that can lead to ruining your stock headlights or taillights if you don’t know what you’re doing. How to tint headlights (tint film or tint spray) tinting your headlights is a fun and rewarding project that you can complete in a day. The reason you should not use a paint is because you can not control even application of the tint.

Then spray every side of the tint to help with the positioning of the tint film.

Read More

How To Replace Recessed Lighting With Chandelier

If the bulb blinks, cut off the main electric supply of the house. How to replace recessed lighting that needs a different sized hole.

Removing a Fluorescent Kitchen Light Box Diy kitchen

Get it as soon as thu, sep 16.

How to replace recessed lighting with chandelier. Can you replace a recessed light with a chandelier? I can't find pendants that i like or glass globes to replace the outdated ones i have. However, when you change how you use a space, such as when you add an island to your kitchen or transform your office.

The light is not the typical round recessed light housing, but it is instead an 8x8in square cut into the acoustic ceiling. Recessed lighting is ideal for kitchens, and it’s what you’ll find in most new homes. Make sure that you switch off the power at the breaker.

You can replace a recessed can with a chandelier in about an hour using a ceiling fan brace with a junction box common hand tools. 1 turn off the circuit breaker to the electrical circuit for the. Chandelier or pendant light (duh) screwdriver (i highly recommend a power drill with screwdriver bit) recessed light converter kit

The first thing you need to do is identify the type of ceiling you have. Here’s what you need to do. The point is, aside from dimmers, relying solely on overhead recessed light gives you little control over the mood or ambiance of a room in the evening.

Replace pendants with recessed lighting? 4.7 out of 5 stars 344. Then you’ll know what your options are.

Converting a standard ceiling light fixture to a recessed light involves removing the old fixture and its electrical box and installing the new recessed light, usually in the same place. Layered lighting from several sources including lamps with shades, sconces and task lights, will give you several options to light the room just right. Before attaching a new lighting fixture to the previous recessed lighting structure, ensure that all the proper wiring is present and safely attached.

My first thought was to. Put a ladder right beneath the recessed light. Recessed lighting fixtures come in many different shapes that require round, square or rectangular cutouts in the ceiling for.

However, with thecanconverter.com recessed light conversion kit, it’s easy to replace a recessed light with a chandelier. This works for a pendant light fixture (like a glass cover or shade), but you can also adapt a recessed light for a regular hanging fixture using this converter: Recessed lighting has its place, but a regular light fixture may be a better choice when you want to make a statement, such as having an elegant chandelier in a formal dining room or a big, bold.

The can converter recessed light conversion kit gives you the freedom to explore which option will work best for your situation. You will need the r56 recessed light conversion kit, a standard phillips screwdriver, wire cutters, and safety goggles. Learn how to replace recessed lighting into a hanging pendant, chandelier, ceiling fan, or a string of swag lights.

My current goal is to install a small chandelier in place of a recessed light. Turn off the circuit breaker. I'm doing a bit of work to convert an extra bedroom into a nursery.

A recessed light, sometimes called a can light, has both its housing and bulb recessed above the ceiling drywall. If you're going to replace recessed lighting with a chandelier or pendant light, there are a few tools and supplies you're going to need: Let’s look at a few options for replacing your old lights with modern recessed lighting.

You can replace a recessed can with a chandelier in about an hour using a ceiling fan brace with a junction box common hand tools. I'm thinking of removing the pendants and going with recessed lights like the rest of the kitchen. If you want a heavier or bigger light fixture that's what you'll want to use.

Join wires of the converter kit to corresponding wires of new fixture, following light fixture directions. If you want us to help you with the chandelier, post a better photo of that.

Read More

How To Make Alcohol At Home With Fruit

If you have never made alcohol before, then try starting with a simple fruit juice cider. During this time the fruit soaks up the alcohol and the alcohol absorbs the flavours of the fruit.

Strawberry Lime Slushies Strawberry lime, Fruity drinks

It’s an easy ferment made from juice and yeast that will make a sweet and sparkling beverage within a week.

How to make alcohol at home with fruit. The amount of sugar goes by the 1:1 ratio, so use equal parts sugar to the weight of the fruit. To make your own homemade fruit wine, you’ll need to get your hands on the following ingredients: Let’s take a look at 5 easiest liquors to make at home with fruit, yeast, and sugar.

Add the fruit puree to the vodka and give it a stir. Next, cover both the sugar and fruit with boiling water and let. Here is a basic overview of everything you need to know to make alcohol at home.

Strain through a nut bag, or several layers of cheesecloth, squeezing to get all the liquid out. Many novice wine makers make the mistake of peeling it while in the rinsing stage, but this removes much of the flavor from the final product. Let sit on the counter, covered, for 24 hours.

Fruit juice or whole fruits like berries, peaches and grapes all make for perfect sugar substitutes. You can create your own alcohol from fruit, fruit juice, grains, and other organic materials that have high sugar content. This will be a very basic alcohol which is about 40 proof and can be used to make several types of alcoholic drinks or fruit and alcohol based beverages.

Continue this process until no more. How to ferment fruit into alcohol. Extra care should be taken while making grain alcohol.

2 drops of liquid pectic enzyme (or any wine additives) 2 pounds of freshly cleaned and cut fruit of your choice (better frozen) 1 packet of yeast. Place about 450g prepared fruit in the jar. In general, liqueurs should contain about 1 cup of sugar per 3 cups of finished liqueur.

If the conditions are right your alcohol can ferment without adding yeast and use natural occurring yeast and bacteria. You can make your own alcohol at home using granulated sugar and yeast. If percentage of alcohol level is high, it may be highly flammable.

Puree the fruit using an immersion blender, a regular blender, or food processor. Making pure grain alcohol at home might be illegal, before starting the process please check with your local officials. Home distilling of alcohol is a nice hobby.

Cover with about 1 litre of 80 proof vodka. Yeast is a living micro fungus that lives in the air. Accordingly harvesting the fruit, preparing fruit mashes, distillation, optimal design of a still to maximize smell & taste, diluting alcohol, storage, ninety recipes for mashes, brandies, infusions and spirits like gin, absinthe, ouzo etc.

Once you have the fermentation process down, experiment with making alcohol at home by using a different source of sugar. But if you want to make homemade alcohol / spirits in a high quality, it is not done to put the fruit into a barrel and leave it. The alcohol content is usually about 20 percent to 30 percent (40 to 60 proof) for fruit and berry liqueurs.

The steps for fermenting fruit into alcohol are easier than you might think. Start by filling a sanitized bucket with your choice of fruit and sugar. Make alcohol from fruit juice at home:

Replace the lid and store in a cool dark area for up to 1 month. You can use your hands to crush the fruit, but a tool such as a potato masher works even better. Since sugar doesn't dissolve well in cold liquid, many recipes use a simple syrup as the sweetener, and that's very easy to make as well.

When using fruit juice, your homemade alcohol will follow a hooch recipe that results in a cheap, homemade wine. This homemade fruit brandy recipe is so easy & makes excellent gifts for the holidays or any occasion. Actually the easiest way to make alcohol is get any baking yeast from walmart mix 3 tbs with 2 liters of sugar water( 1.8 liters of warm water, 3 cups unbleached sugar) add the yeast and shake bottle.

Home brewing is a great hobby, but can take a lot of ingredients, specialized equipment and the knowledge to put them together to make something that doesn’t taste like it was fermented in a toilet. If it is processed in a wrong way, it can be toxic. If you want a stronger flavored wine avoid peeling the fruit while rinsing.

Alcohol is produced when sugar and yeast combine to make alcohol and carbon dioxide. The ingredients are easily available and so is the equipment required. 1 gallon of boiled water.

You can make alcohol without adding yeast but you can't make alcohol without yeast entirely.

Read More

How To Upholster A Headboard With Foam

Carefully press onto the upholstery foam in place and hold for a few seconds. Attach the foam and batting to the headboard frame.

DIY Upholstered Headboards Diy headboard upholstered

Make sure you have enough foam, batting, and plywood to cover the area to be upholstered.

How to upholster a headboard with foam. Foam for a headboard can be expensive. 5 lay the batting over the foam, centering it carefully. Step #5 centre the dacron batting on top of the foam, then turn the headboard over so that the batting is on the floor.

This high cost of foam can deter many diy enthusiasts from completing the project. 3.) round the corners of the form with an electric carving knife. This way it was one big piece with no seams.

Make sure to fold the corners neatly and trim excess fabric in order to keep it looking presentable. Then fold the edges of the foam down to meet the plywood, creating a gentle curve. For our king size diy headboard, we kept the edges sharp.

Stick the foam to the panel, except along the perimeter. The material on top is a microfiber/suede something. How to make an upholstered headboard you can change your headboard with the seasons with this decorating project.

Step #4 glue the foam to the plywood with spray adhesive. Then, i adhered the foam to the plywood by way of spray adhesive, then cut any excess off with an electric knife so that the edge of the foam and the plywood would be flush. If you plan to put buttons on a tufted headboard, first create the pattern on the wood and drill holes through it to secure the buttons through the foam, batting and upholstery material.

I just laid it in the floor and then put the headboard on top and traced the shape onto the foam and then cut out the foam. Take your headboard foam and mount it to your plywood using a spray adhesive. Step 5 wrap in batting and fabric photo by gregory nemec

Polyurethane foam is the most durable and is the. I had to purchase 5 yards of the 2″ high density foam because they’re only available in 24″ widths and i had to piece it together to fill the entire headboard. Trace the curves by pressing the paper near the edge, then mark it using a pencil.

Then i laid the foam on top of the headboard and wrapped the headboard with two layers of batting. Pin and sew the seam all of the way around just the top fabric. So, first line up the end of the cord with the end of the headboard fabric.

Expensive foam just makes the project easier. Continue spraying and placing the batting until the entire surface is covered. 4.) glue the foam to the plywood with a hot glue gun.

Line up the foam with the edges of the frame, lay the frame flat (front side up), and apply the foam to the front of the frame with spray adhesive. I took an old foam mattress cover and cut it to cover the headboard. Carter oosterhouse shows how to dress up a bedroom by making a custom headboard using a white pine frame, plywood, and topped with a memory foam cushion.

Staple around the entire perimeter, trim any access and attach additional foam to cover any bare areas (images 3 and 4). Repeat this process using your fabric of choice. However, you don't need expensive foam to upholster a headboard.

I did drill holes in the back of the plywood and tried to use wire, thread, needle etc to tighten the foam/material and create a tuft look. Pad the headboard photo by gregory nemec. Flip the headboard back over so the legs and frame are on the bottom.

Wrap the excess batting around to the back of the headboard and use a staple gun to secure in place. It will only take a few seconds to dry. Line up the foam at the top corner (image 1), and begin attaching with staples as close to the edge as possible (image 2).

The sheets of paper can be attached to the headboard using tape, and the pieces can be taped together if necessary. Attach to the backside of the plywood with the staple gun, pulling it tautly as you go. I made an upholstered headboard, with plywood and about 3 inch foam, and a little bit of batting.

Once the glue is dry, lay the batting over the foam, turn the board over and secure using staples. We had a 1 inch piece of foam cut at our local upholstery fabric store. Reuse foam from other places if possible.

Create a template using heavy duty paper.

Read More

How To Clean Your Retainer With White Vinegar

You can use cleaning tablets that you can find at any drug store. Let your retainer soak for 10 to 15 minutes, and it should come out clean and sanitized.

1.5m AntiTwist Shower Hose Chrome Shower hose, Shower

Create a solution of half water and half vinegar.

How to clean your retainer with white vinegar. Place your retainer in the vinegar solution. After 20 minutes, remove your retainer from the natural cleaning solution and wash thoroughly. Wait 20 to 30 minutes.

Undiluted white vinegar is sometimes recommended. To clean your retainer with vinegar: White vinegar is a mild disinfectant, and it can help to remove odour and residue from retainers.

White vinegar is also a natural disinfectant. Soak your retainer for at least 30 minutes before using a soft bristle brush to try and remove the crusty spots. Mix the white vinegar with water, 50/50.

How to clean your retainer with white vinegar. In a jar or bowl mix together the vinegar and water. Vinegar to deep clean a retainer.

Castile soap is a safe and effective way to clean retainers. Brush your retainer similar to your teeth. Soak the retainer in the vinegar cleaning solution.

Make sure all parts of the retainer are covered. Place your retainer into the natural cleaning solution and let it soak for 20 minutes. Just create a mixture of white vinegar and warm water, and let your retainer soak.

They have antibacterial, cleaning, and deodorizing agents that can get rid of calculus and plaque while also eliminating bad smells. Pour vinegar into the water to make a 50/50 solution. Soak it for 1 hour to all day.

In a small bowl, you can mix together half vinegar and half warm water, and then soak your retainer in this for 20 minutes. Soaking your retainers in a vinegar and water solution removes calcium and mineral deposits on the retainers and also eliminates odors and bacteria. Bath it in a mixture of white vinegar and warm water (1:1).

How to clean your retainer with vinegar and baking soda. Let sit in the vinegar for 20 minutes to an hour. As well as improving the staining this can also improve bad breath!

Vinegar can rid your retainer of bacteria and fungus. The vinegar mixture will have some positive effect on killing the undesirable germs and bacteria that can stick to trays. Bad breath has lots of different.

Use these steps to clean retainers with vinegar: Mix equal parts warm water and white vinegar in a clean stainless steel container. Dissolve 2 tablespoons of baking soda in the mixture.

The retainer should then be soaked in the mixture for 20 minutes. If your retainer is extremely dirty, after this you can then rinse it with cold water, and soak again in a new batch of. Dish soap, baking soda, white vinegar, or hydrogen peroxide.

We want to use white vinegar as our preferred cleaning vinegar and about half a cup will work. To clean your retainer, you must place it in the ultrasonic cleaner’s chamber with a solvent. The vinegar will help break up the ‘ barnacle ‘ looking mineral deposit on your retainer.

You don’t need to soak it very long, so don’t use this cleaner overnight. The retainer should then be soaked in the mixture for 20 minutes. There are several ways you can clean your retainer including:

To clean a plastic retainer, start by mixing equal parts white vinegar and water in a cup. First things first, please rinse your retainer (or aligner) every time you remove it from your mouth. Make sure to thoroughly rinse your retainer after the vinegar soak, and then place it in a stainless steel container with distilled water.

Use a stainless steel container to soak your retainer in a mixture of lukewarm water, white vinegar and baking soda. White vinegar is a safe, potent cleanser for your retainer. These compounds work together to remove plaque and kill bacteria.

Soak your crusty retainer in a warm bowl of half white vinegar/half warm water for 20 minutes. Place the retainer in the cleaning solution. Have a clean glass container and fill it halfway with warm water.

To extend the life of your retainer, let it soak in distilled water. It is easy to make your own castile soap. If the retainer is covered with film or mineral deposits, a soft toothbrush can be used to clean the retainer.

It also removes the yellowish layer formed on it. The vinegar and water mixture is an easy natural way to clean your invisalign aligners at home, without any crystals. To clean a retainer with vinegar, people should create a mixture in a small dish that is half white vinegar and half warm water.

Then brush your retainer gently with a soft bristle toothbrush, and rinse it thoroughly in warm water.

Read More

How To Close Blinds With 4 Strings

Cordless blinds are easy to open and close important considerations opening and closing your blinds doesn’t have to be difficult, but there is more to the process than twisting cords and yanking on strings. The most common way is to keep them together and to the outside.

Ellisia 19 3/4"W Silver Organza Shade Chrome Ceiling Light

People who have blinds with three strings often complain about not being able to open or close them without messing up the blinds somehow.

How to close blinds with 4 strings. A brake, or cord lock. To close window blinds, just loosen your grip on the string to lower the blinds and allow them to rise back up toward the motor. If your blinds have a rail system, gently pull the rail down to close them and lift the rail to open them.

You may wonder if there is a correct way to open and close your blinds for privacy, light control, and uv protection. Blinds may seem like a simple decoration to finish the design of your room, but they are also very functional in that they allow you to control the amount of light or darkness that comes into your home. 4.4 out of 5 stars.

I assume that the two on the right are supposed to be what you use to close the blinds down. You can hold the bottom panels in your hand and pull the two caps off the panel. Alternate roman shade download article.

How do blinds work without strings? 4.4 out of 5 stars. Depending on the exact cordless product you choose, either twist the.

Blinds or shades with no external cords or strings. You can keep the blind in the middle or at your desired. I didn't make the video, but it is hard to write it all out.

Then, pull the cord over to the right of the window to lock the blinds in place. However, it seems like someone has cut the strings in half and reattached the plastic things so that the blinds can only be closed halfway. In fact, corded blinds can hold out a bit longer than cordless blinds, depending on treatment of course.

Pull the strings diagonally to the left until the blinds rise slightly. Remove the bottom panels of the blind shades with your hand. Blinds come in several different styles, and the method for closing and opening them varies depending on many factors.

Remove the bottom panels and pull the broken string. Once the blinds reach where you want them, grasp the cord firmly to stop them from going up farther. And when it comes to closing the blinds, pull the string slightly to the left in order to unlock the string and you will notice your window covering is lowering down.

So i recently moved into a new place, and it has some weird blinds. The one on the left acts as a pully where pulling one string down will make the other go up, and doing this rotates the blind at the top (i think). Basically my blinds have four strings, two on the right and two on the left.

To raise the blinds, pull the string towards the down and to lock it in the position, move the string a little right. How to close blinds with 4 strings. Advertisement step 1 gather both of the strings from the blinds in one hand.

How to close the blinds with string. 401025 introduction string ladder allows for blind slats to rotate to let light in and block light from entering into a room. When you nudge the bottom rail up, it tilts the slats down to close the view.

How to close blinds with 3 strings. Gather both of the strings from the blinds in one hand. Venetian blinds are comprised of horizontal slats of varying materials that connect with strips of cloth or strings.

To lower blinds with three strings, you need to treat the three strings as if they were one. Pulling on the strings a certain way will enable you easily and smoothly close the blinds at will without having to wrestle them to keep them from going lopsided or opening even further. Step 2 pull the strings diagonally to the left until the blinds rise slightly.

Let go of the cord slowly to make sure that the blinds are locked properly. They should move easily with a little pressure. 99 get it as soon as tue, jun 29.

Cordless blinds tend to be a little more costly than the others on this list. Lock the blinds in place by pulling the cord to the right. Gather both of the strings from the blinds in one hand.

Cut off the strings at the ends of the blinds string and the safety washers. If you’re wondering how to operate these blinds, you’ve come to the right place. If there’s no twist wand hanging down, tilt the rail itself to rotate the blinds.

How to close the blinds with string gather both of the strings from the blinds in one hand. 3m grey gazebo with 4 pull down blinds gh direct. Should you close your blinds up or down?

Pull the strings diagonally to the left until the blinds rise slightly. Cordless blinds can be a neater option, but at first they can seem a little confusing to open and close. They are commonly made of thin aluminum or plastic although wood or bamboo is also used.

34 single cell bottom uptop down cellular shades with. This will lower the slats, which will bring the blinds toward the bottom of the windowsill. They basically have 4 strings on the right, held together by a ball on the bottom.

Add 5cm to the width and drop for hems.

Read More

How To Unlock A Door With A Keyhole

To push the hinge you should pin it up and out. Keyhole bedroom door 225 a tennis ball to unlock car doors how to pick open a lever lock unlock keyhole door how to a locked bathroom door without keyhole.

How to Replace or Fix an Ignition Lock Cylinder to Unlock

Get a lock pick set.

How to unlock a door with a keyhole. One of the most common ways to accomplish this is to kick the door down or ram it so that the lock is dislodged from the door jamb. You may need to turn the screwdriver in order for the door to unlock. You should note that if your door has a trim on it you have to.

These are some of the ways in which you can unlock the door without a keyhole. Ideally, you’ll manage to get into the bedroom without destroying your door or the doorknob, but this may not. Place the butter knife into the keyhole in the same way that you would use a key.

Instead, we go for the door frame. Use a hammer to ruin the doorknob. Bathroom door that is either locked ways to unlock a door when you ve lost door lock privacy exit a locked bathroom door without keyhole open locked bedroom door without key how to unlock a door 11 s with pictures wikihowhow to unlock a door 11 s with pictures wikihowhow to unlock a door 11 […]

You should note that if your door has a trim on it you have to first trim it in order to gain access to the locking mechanism using your plastic card. To unlock the door you should manually pull the locking mechanism back into the door. To unlock a door with a keyhole, you can pick the lock with 2 bobby pins.

You can unlock a push door lock with the screwdriver, as a small and thin screwdriver can work best on interior doors with privacy handles. If the door has trim on it, you may have to remove the trim in order to gain access to the locking mechanism with a plastic card. Another way to unlock a door without a key is to simply work on making the door and its accompanying door lock somewhat irrelevant.

These are some of the ways in which you can unlock the door without a keyhole. Insert a thin credit card on certain lock styles. A simple passage door lock is bypassed easily, it is low security.

How to unlock door without keyhole. If you are locked out of a bathroom in your home, a butter knife is an easy tool to use to help you unlock the door. The process is simple enough:

This may require plenty of patience and determination. You should repeat the same procedure with the upper door hinge taking care that the door doesn't fall off the hinges and on top of someone. Bedroom and bathroom doors often use this type of lock.

This can be done in multiple ways. ♦ if the keyhole turns, remove the straight bobby pin slowly, don’t do it in a snap. How do you unlock a door with a hole in the knob?

You have to insert the screwdriver in the keyhole in the knob door straight as far as you can. Faqs how do you unlock a push lock door? Most elevators have their door keyhole located on one door panel and aligned to the edge of the door, while some others may be located on.

The best way to do it is to insert the card in the door frame and slide it down towards the lock. How to unlock push and twist button door lock: Door keyhole (also known as a escutcheon tube) is an elevator device used to unlock the landing doors interlock in elevator maintenance or in the event of an emergency like entrapment, and it can only be done by an elevator engineer and the firefighters.

Use a small, thin screwdriver to pick the lock. A pocketknife will also work for prying open a door, but there is an increased risk of damaging the paint around the door or cutting yourself, so the plastic card is a safer method. Always keep the door closed while running hot water.

How to unlock a door 11 s with pictures wikihow. Once the lock releases, turn the knob to open. From the locked out side, insert the putty knife at a 45 degree angle and gently move upwards.

The process will damage the lock, naturally, but my door will remain intact. How to unlock a bedroom door without a key. For example, those who wish to unlock the bathroom door with a hole on the side must close the bathroom door before turning on hot water and wait till the temperature of the water cools down a bit.

The main purpose of the doors of bathrooms, kitchens or even bedroom isn’t security and they are not impassable without a key. Precautions while performing how to unlock bathroom door with hole on side. By staff writer last updated march 28, 2020.

I have several tools which work, but a thin putty knife blade will work. For this purpose, we don’t address doorknobs; How to unlock a door knob without a key (using a substitute key) tools required (paper clips, small screwdriver, old other keys, collar pin, etc.).

Just insert the screwdriver into the small hole and press the button on the inside of the handle with it to unlock the door. So, yes, plastic cards can be used as another convenient way to unlock doors without the keyhole. Most of these type of doorknobs with a hole is used with the interior doors of the houses.

Twist the knife to gently release the lock and then turn the doorknob to open the door. Open an interior privacy lock with a hole in the knob by determining the type of lock, fabricating a pick and unlocking the knob.

Read More